In a related post I have told you we solved the girth problem. I know that sounds weird, but really, we did.
And now in 2018 have a workshop to prove it.
I heard a story a while ago at a clinic, while showing some girths to an interested crowd.
It goes like this: A friend who also rides for pleasure, was walking through CDI stabling at Dressage World Cup, witnessed a bunch of ears back, tails swishing behavior at tack up.
She asked, “How come all the nasty faces?”
Companion’s answer, “They are ALL like that–dressage horses.”
Nope. They DO NOT HAVE TO BE!
(And please, now that we know how to fix it–FIX IT!)
Here I am also going to tell you quite simply how we finally managed to make the horses more comfortable. So it will perhaps make more sense.
The solution came about by trying things we suspected would work. Most of them did not. If you do this as a job and watch carefully without investment, the so called perfect answers really don’t work as much as you’d hope.
Our prejudices at the start:
- We liked our cord “mohair” girths–and on investigation found they were no longer made of corded mohair, but nylon with no give whatsoever. Their only virtues were they typically do not rub and they are inexpensive.
Would anyone like a pile of them?
2. Real fiber with spring actually is good–but you can’t buy it for $24.99. Ever feed a goat? We have. You shear them once a year and it takes them a whole year to “grow” a fiber girth. Then some human has to spin it and cord it and ply it.)
These things are gorgeous! Darin Alexander, ArtCords did these. They are much much better than nylon but at the tension we keep them they were not a solution unto themselves. I gave mine away because I could not bear to have the moths get them.
3. We thought unlimited stretch fabric girths would be nice. Our horses don’t like them. We asked, they made faces.
4. We didn’t like elastic ends. Now we don’t care–the horses don’t care. But if you have them, please have them on both sides
5. We didn’t like short girths–too much hardware in moving places.
We still don’t like short girths and the horses have gotten over the bruising from trying the standard models. Eventually we came up with one fitted with carefully measured–buckles as high as you can get them that actually works. A tiny bit of elastic, a girth shield added–see lump like full snake in middle–and a girth cozy–no more ugly faces. We will show you one at the end of the post.
6. We thought anatomic girths would be nice. The horses walked off with peg legs.
Same of the “shoulder relief” girths. The might work with a hunter saddle designed to be ridden up over the withers. They cause a huge amount of elbow infringement in a “normally” placed saddle. (Try one on and stick your fingers in the front side of it and walk the horse. OUCH!)
7. We thought contoured girths with “humane” ends (which we still like–the humane ends) would be great.
The horses would not walk at all.
8. We thought the Balding was old fashioned.
The horses liked them pretty well.
Then we got frustrated that older and older was better and better and bought ourselves one of these very new things:
It is meant to check your saddle fit, but it worked very well on the bottom side of the horse too.
We strapped it to the beast and rode with it. (Beast did not mind).
And then looked at it carefully. The middle section is the pectorals–still some gel. The spots that bottomed out–you can see light through them–are just behind the elbows at the base of the ribs. And it bottomed out every single time we tried–a lot of pressure was being exerted there at the base of the rib cage.
So then off to the Internet and much study of anatomy and other people’s tests on race horses and girth tightening pressures and many many hours into it we came up with something that worked. The Girth Shield concept allows the horses to breath naturally while securely holding your saddle in place. And that is what the horses are grumping about when you tack them up–when a normal girth is tightened it is hard for them to breath, and it hurts.
The horses are now all very happy. No more ugly faces
Melynnda got her Silver Medal, I dusted off my Gold and then stuck it back in the car’s ash tray.
We found a way to give room for normal rib expansion by creating what is in effect a second tree for the base of the horse. 6,7,8 or 9 inches wide. One size does NOT fit all. But it’s not so complicated. a length that puts the buckles where you want them and a measurement across the pectorals.
The design evolves.
There are lots of ways to get around problems.
The X Girth is above, and it is about as simple as you can think of–other than it is hard to make because of the continuous loop. It is easy to use. Inexpensive. We call it the dry martini of the girth world.
If you want one, make contact.
What’s to lose? (Strong hint–the nasty faces and peg legs for a start.)
Below a modified girth and how it looked before we modified it.
The heavily padded shield at the base of the girth creates a place for the horse’s ribs to expand when the girth is fully tightened. Problem solved.